PEG Forum Member Gallery

Patrick Eggle Guitars Forum


Last additions - Amps & FX
Common_pedal_board_revised_side_view.jpg
Common pedal board (revised) side view.38 viewsShowing legs at front shorter than rear to incline towards me when playing making access easier.tone256Dec 20, 2011
common_pedal_board_revised_bottom.jpg
Common pedal board (revised) bottom.43 viewsPSU and sound gate mounted on bottom as they are both "set & leave" (so routine access not required). All electrics and some signal cables routed underneath to keep top uncluttered.tone256Dec 20, 2011
common_pedal_board_revised_rear_view.jpg
Common pedal board (revised)39 viewsShowing back row raised to improve accessibility. TUner and chorus raised by 1/8 inch, compressor raised by 3/4 inch to bring them in line.tone256Dec 20, 2011
Common_effects_board___case_-_low_res.jpg
Common effect board in case.94 viewsThe board was built to fit this case.tone256Sep 12, 2011
Common_effects_board_back_-_low_res.jpg
Common effects board92 viewsBuilt for use with Artisan 15 and Matamp 1224. Replaces previous boards.
T-Rex Chameleon Fuel Tank power supply mounted on bottom to save space. All electric wiring and most signal wires underneath for neatness.
There are 8 units to power. Although the p.s.u. has only 5 outlets, each one provides 300 mA and so can power more than one unit, as follows: 1 (9v neg. centre) - tuner & chorus; 2 (9v neg. centre) - wah & delay; 3 (9v neg. centre) - noise gate & channel switch; 4 (18v neg. centre) - distortion; 5 (9v pos. centre) - receiver. The output from the Boss TU2 tuner will be used to power the indicator lights on the amp switches (voice, gain, reverb) when I use the Matamp.
tone256Sep 12, 2011
Common_effects_board_front_-_low_res.jpg
Common effects board91 viewsFor use with both Blackstar Artisan 15 and Matamp 1224. Replaces previous two effects boards.
Laid out ergonomically, i.e. the effects changed most often & most particularly during a song, are at the front.
Signal path is as per convention, i.e. radio receiver - tuner - distortion - wah - delay - chorus - noise gate - channel switch - amp.
tone256Sep 12, 2011
Artisan_15_low_res.jpg
Blackstar Artisan 1556 viewsAll valve, 1 x 12, 2 channel combo switchable between 5 and 15 watts. Having sold my Matamp 1224, this is now used exclusively for gigs. With the pedal board, it provides all the sounds I need and, with a Hughes & Kettner Red Box permanently fitted, is usually D.I.'d, so is plenty loud enough. Bought the Matamp Jazz & Bass because of its clean sound and headroom and so sold.tone256Jun 14, 2010
Small_effects_board_-_psu.jpg
Bottom of small effects board showing T-Rex Fuel Tank Chameleon PSU80 viewsProvides 300mA from each output. 3 providing choice of 9v or 12v DC, 1 at 9v or 18v DC and 1 at 9v or 12v DC or 12v AC. Configured to provide 1 @ 12v DC + centre, 2 @ 9v DC - centre, 1 @ 9v DC + centre and 1 @ 18v DC - centre.tone256Jun 12, 2010
Small_effects_board_-_pedals.jpg
Small effects board88 viewsTop row from right to left: Samson AP1 wireless receiver, Boss TU2 tuner, Fulltone OCVD distortion.
Bottom row from right: MXR Carbon Copy delay, Morley ABY (switching or combining channels).
The signal chain is in the order described above.
tone256Jun 12, 2010
pedal_board_v3_lowres.jpg
Pedal Board version 3170 viewsFurther modified to include the Voodoo Valve Pedal Power 2 Plus. See General "Non-Music Discussion - Powering Pedal Boards" for details. tone256Oct 17, 2006
effects_board.jpg
Pedal Board version 2140 viewsCHANGE: Taken out chorus and replaced with Keeley compressor.
REASON: Stopped using chorus after programmed more attractive "chorus like" sound into delay unit. Compressor thickens single coil sounds, which is useful for instrumentals in particular.

CHANGE: Layout from right to left instead of left to right.
REASON: Pedals have "in" on right & "out" on left. New layout makes cabling neater.
tone256Jun 21, 2006
Pedal_board 2.jpg
Pedal board version 1213 viewsEffects: Boss TU-2 tuner; Morley Bad Horsey Vai 2 Wah*; Mesa Boogie V-Twin overdrive; Boss Chorus Ensemble CE-5; Boss DD-20 Giga Delay.
(* Replacement for Snarling Dogs Whino-Wah because it's easier to use.)
Amp controls: Overdrive; Voice (5 degrees of sound from thin to thick); Reverb.
tone256Nov 03, 2005
Matamp_1224___cab.jpg
Amp and half stack206 viewsAmp: Matamp 1224. Special feature is that there is no increase in volume when switching in the overdrive. This mod. was made at my request; I can get additional volume and overdrive with the Mesa Boogie V-Twin. For more information on the amp, go to: http://www.jurassicrock.co.uk/matamp_1224.htm
212 Cabinet: Celestion G12M Greenback and Celestion G12H 70th Anniversary Special Edition wired in series giving about 40 watts at 16ohm. Used little after buying the Blackstar Artisan 15 and so sold.
tone256Nov 03, 2005
         
31 files on 2 page(s) 2