PEG Forum Member Gallery

Patrick Eggle Guitars Forum


Most viewed - tone256's Gallery
rcf_rig_stage.jpg
Front of house - further back86 viewsMixing console, etc. on left.tone256
009_damage_top_horn_front.jpg
Damage to the front of the top horn86 viewstone256
16_back_post_spirit.jpg
Back after washdown with white spirit.85 viewsAs per front.tone256
karen_s_party0019.JPG
Special effects at Clare85 viewsPlaying locally at a friend's birthday party, another friend took the opportunity to show some photographic creativity.tone256
14_back_post_sand.jpg
Back after sanding84 viewsDetails as per front after sandingtone256
010_damage_bottom_back.jpg
Damage to the bottom of the back of the body84 viewstone256
016_case_damage_2.jpg
Case internal82 viewsDamage to flap hinge.tone256
08_dismantled.jpg
Front following dismantling ready to strip old finish81 viewsNeck, hardware & electrics removed except earth wire from the control cavity to bridge. This was left in place as wouldn't get in the way and is difficult to thread back through.

Temporary handle fitted by screwing through the handle into the neck socket (ensuring screws long enough to obtain grip, but not long enough to come through body). This makes applying stripper and final finish easier as it provides something to hold and to hang on when drying.
tone256
18_back_7coats.jpg
Back after 7 coats81 viewsSee front for detailstone256
rcf_foh.jpg
Front of house80 viewsOne of these stacks per side.

Top unit: RCF 500A - 500 watt Monolithic bi-amplification, 400 watt low frequency and 100 watt high frequency power; crossover frequency 1200 hz. 15” high efficiency woofer, 75mm edge wound aluminium coil. Efficiency: 129 dB max SPL.

Sub-bass bin: RCF 705AS - High current 800 watt class H amplifier. 15” high power woofer, 75mm inside/outside copper coil. Efficiency: 130 dB max SPL. Crossover set to 120 hz.
tone256
037_whole_front_finished.jpg
Whole front following restoration80 viewsNot so much restored as assembled from various parts. Main features different from standard:
Gold plated Schaller 3L3R M6 locking tuners
Gold plated Tune-O-Matic bridge
Gold plated stop tailpiece.
Rosewood, purpose made scratchplate
Rosewood, purpose made truss rod cover
Rosewood, purpose made bridge pickup surround
Matched pair of Bare Knuckle Geoff Whitehorn Crawler pickups with gold plated covers
Three-way selector and two volume controls (one per pickup) all with gold knobs
tone256
0002_leaflet_inner.jpg
Leaflet inner pagers80 viewstone256
003_pre_whole_back~0.jpg
Whole back pre restoration80 viewstone256
Small_effects_board_-_psu.jpg
Bottom of small effects board showing T-Rex Fuel Tank Chameleon PSU80 viewsProvides 300mA from each output. 3 providing choice of 9v or 12v DC, 1 at 9v or 18v DC and 1 at 9v or 12v DC or 12v AC. Configured to provide 1 @ 12v DC + centre, 2 @ 9v DC - centre, 1 @ 9v DC + centre and 1 @ 18v DC - centre.tone256
22_pup.jpg
Pickup78 viewsGuitar sold to RevMatttone256
20_back_16coats.jpg
Back after 16 coats76 viewsAs per front.tone256
003_body_pre.jpg
Body front before restoration76 viewstone256
008_damage_top_front.jpg
Damage to the top front of the body74 viewstone256
271 files on 16 page(s) 6